7 photos
Uprony · Vehicle & Boat Rod Holders
Uprony Rod Holders, 6-Pack, ABS Plastic Tubes, Mounting Hardware
Check price on AmazonAs an Amazon Associate First Cast Fishing earns a commission when you buy through links on this site, at no extra cost to you.
Quick take
Six plastic rod holders with lock nuts and screws for mounting on boats, trucks, kayaks or coolers to secure rods hands-free.
Six black ABS plastic tubes, each 10.6 inches tall with a 2.3-inch inlet, set this Uprony holder apart for anglers who want to park several rods at once. Every tube bolts down with one of the 24 screws and 12 lock nuts in the box, so the set mounts to a boat deck, kayak crate, trailer, cooler or garage wall. The 1.7-inch width keeps the footprint narrow on a crowded gunwale. The open front mouth lets you slide a rod in with one hand. Because the tubes are plastic rather than metal, they suit wet boats and freshwater or saltwater use.
Best for
- Securing multiple rods while waiting for fish to bite
- Holding rods on boats or kayaks during trolling or while anchored
- Freeing hands to net fish or manage other tackle
Skip if
- You fish from shore and carry your rod by hand
- You want flush-mounted holders that sit lower and are less visible
Strengths
- Plastic construction is lightweight and does not rust in saltwater
- Lock nuts prevent screws from loosening from boat vibration and waves
- Open-mouth design allows quick insertion and removal of rods
Trade-offs
- Plastic may become brittle in extreme sun exposure over years
- Inlet diameter 2.3 inches limits use to standard-diameter rods only
- Open design offers no protection if the boat tips or rods are stored in water
Specifications
| Type | rod holder bracket |
|---|---|
| Count | 6 holders |
| Material | ABS plastic |
| Height | 10.6 inches |
| Inlet diameter | 2.3 inches |
| Hardware | 12 lock nuts, 24 screws |
How it compares
| Product |
|---|
| Uprony Rod Holders, 6-Pack, ABS Plastic Tubes, Mounting HardwarePick it if you want six rods held hands-free on a boat deck, kayak crate or trailer, using the 2.3-inch inlet tubes and the 24 screws included in the box. |
| PLUSINNO 4-Pack Fishing Rod Holders for Boat, Aluminum Dual-V DesignPick it if you need four clamp-on rod holders for one boat rail or tube and want each rod to lock at its own angle. |
| PLUSINNO Rod Holder, Adjustable Clamp, 1.97 in Max Opening, 2-PackPick it if your boat rail or tube is up to 1.97 inches wide and you want two 360-degree holders for spinning, casting or spincast rods. |
| Marinebaby Tournament Boat Rod Holders, 316 Stainless Steel, PairPick it if your boat has rails measuring 7/8 inch to 1 inch and you want 316 stainless holders with a 10 inch tube. |
| Hikeen Boat Fishing Rod Holder, 2-PackPick it if you need two boat rod holders for a rail or deck, with a jaw that opens to 3.15 inches. |
| Haida 20-Degree Sure Grip Steel Rod Holders, 4-Pack with Deck MountPick it if you want four deck-mount holders for a boat or kayak that will carry rods of 25 lb line or heavier. |
Common questions
What rod diameter does the Uprony 6 Tubes fishing rod holder fit?
The Uprony 6 Tubes holder has a 2.3-inch inlet diameter, so it takes rods whose butt sections fit through that opening. Its front mouth is open, so you slide the rod in from the side. Check your rod's handle diameter against that inlet before you buy.
How many screws and nuts come with the Uprony 6 Tubes rod holder?
The Uprony 6 Tubes holder ships with 24 screws and 12 nuts. The nuts are lock nuts with a nylon ring inside that resists loosening, which helps the tubes stay tight on a boat deck or trailer over repeated use.
Can the Uprony 6 Tubes rod holder mount on a kayak crate or garage wall?
Yes, the holder is designed to bolt to a boat, truck, kayak crate, trailer, cooler or garage wall. Each plastic tube stands 10.6 inches tall and 1.7 inches wide. Mount the base where the screws can bite into solid material.
Is the Uprony 6 Tubes fishing rod holder made of plastic for saltwater use?
Yes, the tubes are ABS plastic rather than metal, in black. The product is described for freshwater and saltwater use. Plastic does not corrode like steel, which suits a boat that sees spray and wet conditions.
Updated