8 photos
YaeMarine · Vehicle & Boat Rod Holders
YaeMarine 4-Piece Stainless Steel Rod Holders, Flush Mount, 15 Degree
Check price on AmazonAs an Amazon Associate First Cast Fishing earns a commission when you buy through links on this site, at no extra cost to you.
Options
- Item weight
- 1.08 Kilograms
- Product dimensions
- 9.61 x 7.68 x 4.02 inches
Quick take
Four polished stainless steel rod holders for boats, flushing into the gunwale or deck.
This is a set of four flush-mount rod holders in polished 304 stainless steel, set at a 15 degree angle. Each has a 9-inch tube with a 2-inch outside diameter, and comes with a rubber cap, tube liner, gasket and gimbal pins. Each one needs a 2-inch hole and three #12 screws, so it suits anglers who want to keep rods in place while trolling.
Best for
- Boat trolling and jigging
- Multi-rod setups on larger vessels
- Saltwater fishing where corrosion is a concern
Skip if
- You fish from small boats or kayaks
- Your boat does not have installation space
Strengths
- Polished 304 stainless resists saltwater corrosion
- Four-piece set covers multiple rods
- Flush mount provides clean appearance
- Gimbal pins allow easy reel swapping
Trade-offs
- Requires 2-inch installation hole, permanent mounting
- Angle fixed after installation unless you buy multiple angles
Specifications
| Type | boat rod holder |
|---|---|
| Count | 4 |
| Material | Polished 304 stainless steel |
| Installation | Flush mount, requires 2-inch hole |
| Tube | 2-inch outer diameter, 1 5/8-inch inner |
| Length | 9 inches over length |
| Angle options | 15, 30, 90 degrees |
How it compares
| Product |
|---|
| YaeMarine 4-Piece Stainless Steel Rod Holders, Flush Mount, 15 Degree |
| PLUSINNO 4-Pack Fishing Rod Holders for Boat, Aluminum Dual-V DesignPick it if you need four clamp-on rod holders for one boat rail or tube and want each rod to lock at its own angle. |
| VEXPLO Bike Rod Holder with Adjustable Pole Mount, 2 in DiameterPick it if you ride a bike, e-bike or scooter to the water and want one light plastic rod holder with a 2-inch opening and a pin that stops the rod from dropping through. |
| PLUSINNO Rod Holder, Adjustable Clamp, 1.97 in Max Opening, 2-PackPick it if your boat rail or tube is up to 1.97 inches wide and you want two 360-degree holders for spinning, casting or spincast rods. |
| Sumind Rod Strap Holder, Elastic, 12 Inch, 4-PackPick it if you want four 12-inch rod hold-down straps for a boat or kayak deck and plan to trim the cord to your spacing. |
| Marinebaby Tournament Boat Rod Holders, 316 Stainless Steel, PairPick it if your boat has rails measuring 7/8 inch to 1 inch and you want 316 stainless holders with a 10 inch tube. |
Updated